Product Details:
|
Packing: | PE Bag, Woven Bag,Carton | Application: | Shotcrete |
---|---|---|---|
Color: | White | Type: | Fibrillated Mesh |
Highlight: | 12mm PP Fiber,Fibrillated Mesh PP Fiber,3500min PP Fiber |
10mm PP Mesh Fiber Improve Tensile And Bending Strength For Shotcrete
PP Mesh Fiber Description:
1. Polypropylene mesh fiber is made of polypropylene resin by special processing and treatment of a bunch of interwoven into a network of fibers. It has a strong binding force with the base material of cement concrete.
2. Polypropylene mesh fiber can greatly improve the impermeability, crushing resistance and impact resistance of concrete, enhance the toughness and wear resistance of concrete, and thus greatly extend the life of buildings.
PP Mesh Fiber Application:
A). Projects like concrete road, bridge, airport road and factory floor which strictly require cracking resistance. The life span of these projects will be lengthened for 5-10 years.
B). The walls of tunnels, mines, roofs and reservoir projects with special construction. When using spray technology in concrete construction, the PP fiber added into the concrete can effectively decrease the spray concrete's deformation rate of the walls less than 8% and that of the roof less than 12%, and also can reduce the friction. It can improve the constructing efficiency and working environment and popularize the spray technology.
C). River courses and dams, etc. The PP fiber can improve concrete's resistance to crack and squirt and wear to lengthen projects' life span.
D). Military defense works, dock banks and piers, etc. This fiber can greatly strengthen the concrete's spurt resistance and heighten these projects' safety and lengthen their life span.
PP Mesh Fiber Applying Instruction:
1.Length : Generally, the proper length of the fiber added into concrete is 20 mm, and in the spray concrete is 10mm.
2.Ratio Design: Usually the proper amount of fiber to concrete is 0.9kg/m3 , and the water-proof layer of the bridge requires 1.35-1.8kg/m3, and the spray concrete in the tunnel is also the same and other materials remain the same. The ratio of fiber and concrete can be determined by
tests for special purposes. The fiber has better effects on the concrete with active compound materials, such as silicon ash, coal powder, ground slag and zeolite powder.
3.Mixer Adoption: Double-axle horizontal compelling mixer is better and self-dropping cylinder mixer can be used, too.
PP Mesh Fiber Specifications:
Raw Material | 100% virgin PP | Fiber type | Fibrillated Mesh |
Crack Elongation | >10% | Melting Point | 160℃ |
Density | 0.91g/cm3 | Tensile Strength (Mpa) | >560 |
Fiber Diameter | 0.035mm | Fiber length | 12,19,38,54mm... |
Elastic Modulas | >3500Mpa | Width | 5mm |
Alkali & Acid resistance | Strong | Ways of packing | PE bag or paper bag |
Certificate:
Contact Person: Linda Qiang
Tel: 0086-13856999452
Fax: 86-551-63517768