100% Virgin Concrete PP Fiber Fibrillated Mesh Form For Reinforcement

100% Virgin Polypropylene PP Fiber Mesh Form For Concrete Reinforcement

Instruction:

1. Length : The commonly used fiber length in concrete is 20mm, and the commonly used fiber length in shotcrete is 10mm

2. Ratio Design: Usually the fiber content of concrete is 0.9kg/m3, the fiber content of bridge waterproof layer is required to be 1.35-1.8kg/m3, the tunnel spray concrete is the same, and other materials remain unchanged. Among a series of active composite materials such as silica fume, pulverized coal, grinding slag, zeolite powder and fiber, fiber has a relatively good effect on concrete.

4. Mixing Process:Crushed stones, fibers and sands will be put into the mixer in turn. After two minutes of mixing, the fiber is fully developed, and then add cement and water, and stir normally. The material can be put in as usual, but the mixing time should be appropriately extended to allow the PP Mesh Fiber to be fully mixed.

5. Stirring Time: Usually 2-3 minutes after adding PP Fiber Mesh Form, the purpose is to make the fiber fully spread into monofilament or net fully spread, thus enhancing the strength of the concrete.

Function:

Specifications:

Application:

1.concrete reinforcement

2.mortar reinforcement

3.anti-cracking resistance

Packing:

1.0.9kg net each PE bag

2.1kg net each PE bag

3.0.9kg net each paper bag

4.1 kg net each paper bag

Certification: