Soft White Polypropylene Monofilament PP Fiber For Concrete Industrial Construction

PP Fiber Monofilament Form

Introduction:

Briture PP Fiber 110F is made of 100% virgin homopolymer polypropylene with form of monoflament type, it is mainly used for concrete and motar reinforcement-anti-cracking.

Features:

1. Easy to be dispersed in motar or concrete and no agglomeration, it can guarantee the property of crack resistance effectively

2. Easy to be used:No need to change the proportion of mortar, just put the fbers into the mortar mixture and stir for a moment after adding water.

3. It with fine economic property: The equivalent diameter of fber is only o 0.03mm, so the ratio of diameter and surface area is high and on the basis of crackresistance, it can reduce the amount (to about 0.6ka/m 3 )
4. Easy to plaster. As the great number of thin fibers spread into mortar evenly, the plastering is much easily and this can improve the binding strength between surface and base.
5. lt with stable chemical property, strong acid &alkali resistance, and can be used in any engineering projects.

Applying Instruction:

1. Comound Amount. To resist the common cracks on surfaces. 0.6ko/m3 fbers to cement paint is enough, and for reinforced appication 0.9-1kg/m3 is enough

2. Stiring requirement. The proportion of cement,sand and aggregate is no need to be changed. Put cement, aggregate, additive and fber together, then stir after adding enough water (Do not stir without water!) and ime for stiring can be prolonged for 2-3 minutes n order to make the comoound mix completely.

Application:

1. Be suitable for the water-proof layer, floor, inner &outer wall of industrial and civil construction.

2. Increase cracking resistance on the surface of industrial workshop, warehouse and parking lot.

3. Increase cracking & seepage resistance of the ground in natatorium, swimming pool, pond and ditch.

4. Be suitable for any mortar projects and fine aggregate concrete projects.